Fp-WM horizontal exposed fan coil unit can be ideally hoisted at any position of the ceiling, elegant and beautiful, does not occupy any indoor area, and is easy to install. The shell is treated by electrostatic spraying, which can match the indoor decoration. It is suitable for the air conditioning engineering transformation of old buildings, which can reduce pipelines and save resources.

group offers a diverse range of specifications and models. Under standard operating conditions, the airflow ranges from 340m3/h to 2380m3/h, with a unit residual pressure of 0 Pa to 50 Pa. The types include: ordinary horizontal / vertical concealed installation, ultra-thin horizontal / vertical / exposed installation / concealed installation, embedded, fan-shaped ceiling type, vertical cabinet type, wall mounted type, etc., with more humanized design to fully meet the user's requirements for air volume, cooling capacity, air pressure and installation conditions.

Fan Coil Safety Performance Testing Room

FP Series Embedded Fan Coil Performance Parameter Table

FP-34WA: Size: 740*460*240(mm); Effective Room: 10m2

FP-51WA: Size: 840*460*240(mm); Effective Room: 15m2

FP-68WA: Size: 940*460*240(mm); Effective Room: 20m2

FP-85WA Size: 1040*460*240(mm); Effective Room: 25m2

FP-102WA Size: 1140*460*240(mm); Effective Room: 30m2

FP-136WA Size: 1340*460*240(mm); Effective Room: 35m2

FP-170WA Size: 1640*460*240(mm); Effective Room: 40m2

FP-204WA Size: 1840*460*240(mm); Effective Room: 50m2

FP-238WA Size: 2040*460*240(mm); Effective Room: 60m2

Remarks:

      1.The above performance parametersare measured according to the matching state without bringing back the bellows.The staticpressure at the outlet of  KM unitis OPa.

      2.Working condition parameters ofcoolingcapacity:inlet airdry bulbtemperature 7℃,wet bulb temperature 19.5℃,inlet water temperature7℃,water temperature difference 5℃.

      3.Working condition parameters of heatsupply:the dy bulbtemperatureofinletair is 21℃,theinletwater temperature is60℃,and the lowof hot wateris the same as that of cooling.

      4.Theaboveparameters comply withtheprovisions ofGB/T 19232-2003.If the user has special requirements,please specify.

We have stock and can quickly pack, test and ship

Characteristic

● The surface cooler of the product is a seamless copper tube series with high-efficiency double-sided aluminum foil. The mechanical tube expansion process is adopted, so that the tubes are closely combined and the heat transfer performance is excellent.

● After special treatment, the air resistance of the heat exchanger is significantly reduced in the process of use. When the wind speed is large, there will be no cold condensation water droplets splashing. At the same time, the surface corrosion resistance is strengthened. The forged brass structure is used to collect water, which greatly extends the service life of the product; The motor adopts a three speed low-noise special motor with high-precision closed bearings. There is no need to refuel and maintain during operation. The operation is stable and reliable, and the service life is up to 35000 hours. The outgoing line of the motor is protected with metal hoses to avoid damage.

● Wide angle volute and metal multi blade centrifugal wind wheel are adopted, with high dynamic balance. 

● The whole condensate tray is stamped and formed at one time to prevent dripping and water leakage. The surface is sprayed with plastic for corrosion prevention, which is durable.

● The thermal insulation material adopts high-density polyurethane, with small thermal conductivity, high water resistance, anti-aging, Flame retardant and non-toxic, which can ensure all-weather use without condensation.

● The lifting hole is equipped with rubber damping pad to minimize the noise of the unit.

Company Showing

FAQ

1. Are you factory or trade company?

We are manufacture,with OEM service.

2. Are there any order requirements?

We will appreciate it a lot if you can offer us your product performance requirements and operation environment, so that we can customize optimal production to meet your every requirement.

(1) Air volume

(2) Cooling/heating capacity

(3) Cooling/heating area

(4) Power and voltage

3. What are your Before-sale services？

(1) Tell customers how to use our products and matters needing attention.

(2) Guide customers to choose the best and economic product, recover the investment within short time.

(3) Site inspection if you need.

4. What are your In-Sale services？

(1)Quality control must be inspected strictly.

(2)In accordance with the agreements stipulated in the contract.

5. What are your After-sale services?

(1) If the project needs our installation guidance, we can send our engineer and translator. We can also send customers installation video to teach them how to fix and operate with our product.

(2) Usually, our product warranty is 18 months after leaving factory or 12 months after installation for non-human factor damages, within this months, all parts broken will be responsible for our factory.

(3) Regular contact with customer, consult with the customer feedback, come true with the customer's two-way communication.

6. How long is the delivery time?

Generally it is 1-7 working days if the goods are in stock, or it is 15-25 working days if the goods are not in stock, it is according to quantity.

• Share this post :